How do I fine-tune the alignment between the image and the screen?

🚀 The following applies to the Aetherion Max & Pro

 To ensure the best alignment and image quality, please follow these steps:

• Projector Calculator: Use this tool to find the exact placement for your setup: https://awolvision.com/pages/projector-calculator

• Leveling: First, make sure the projector feet are fully screwed in. Confirm that both the projector and screen are level from left to right and front to back.

• Centering: Use a piece of tape (or any marker) on the front of the screen housing to indicate the exact center. When you bring up the correction chart, align the notch at the bottom with this mark to confirm you’re perfectly centered.

• Distance: Measure from the screen surface to the projector. For example, for a 130″ screen, the projector should be placed at 11 inches.

• Screen Height: Reinstall the screen if necessary so that the screen height matches the throw ratio requirements.

• Fine Tuning: If needed, you can move the projector slightly farther back and use Manual & Auto Keystone Correction to bring the image in. Keep in mind this may affect the rectangular shape, so it’s up to your preference.

  • Path: Remote Menu Button -> Laser Settings -> Manual & Auto Keystone Correction

| Proper physical placement is always recommended before using digital keystone correction for the sharpest image quality.